Top Panel - Agilent Technologies N9913A User Manual

Top Panel

Caption Description
Port 1 For CAT and NA measurements, use to make reflection measurements.
RF Output Maximum: ±50 VDC, +27 dBm RF
Port 2 For SA, use to make all measurements.
SA RF Input
For CAT, NA, and VVM mode, use to make Port 2 transmission
measurements.
Maximum: ±50 VDC, +27 dBm RF.
GPS Ant For use with built-in GPS. Produces a 3.3 VDC bias voltage for the
antenna pre-amplifier. Use with a GPS antenna such as N9910X-825.
Other GPS antennas can also be used.
Ref In Frequency Reference Source and External Trigger Input signal.
Trig In
Maximum: 5.5 VDC.
16
Learn More
CAT Mode on page 20
NA Mode on page 39
SA Mode on page 81
GPS on page 206.
Freq. Ref on page 209.
Ext Trig (SA Mode) on
page 100
FieldFox User's Guide