Top Panel; Side Panel - Agilent Technologies FieldFox N9923A User Manual

Top Panel

Caption Description
Port 1 For CAT and NA measurements, contains source and A / R1 receivers.
Maximum: ±50 VDC, +23 dBm RF
Ext Trig/Ext Ref External Reference connector to connect to an external frequency
reference. Maximum: 5.5 VDC.
External Triggering is not used on the N9923A.
Port 2 For CAT and NA mode, contains source and B / R2 receivers.
Maximum: ±50 VDC, +23 dBm RF.

Side Panel

Caption Description
Ethernet cable connector to read trace data using the FieldFox Data Link Software.
Reserved for future use.
DC power connector used to connect to the AC/DC adapter. Maximum: 19 VDC, 4
ADC.
Micro SD Micro Secure Digital slot. Use to extend the memory of the FieldFox.
Standard USB connector used to connect a power sensor for Power Meter Mode.
Also used to save files to a USB flash drive.
Use of Keyboard and Mouse is NOT supported.
Audio output jack.
16
Learn More
CAT Mode on page 19
NA Mode on page 19
Ext Ref on page 98
CAT Mode on page 19
NA Mode on page 19
Learn More
Data Link webpage
On page 11
File locations on page 86
File locations on page 86
N9923A FieldFox User's Guide