Table of Contents
Advertisement
Top Panel
Caption
Description
RF OUT
For CAT and NA measurements, use to make reflection measurements.
Maximum: ±50 VDC, +23 dBm RF
Ext Trig/Ext Ref
External Reference connector to connect to an external frequency
reference. Maximum: 5.5 VDC.
RF IN
For CAT and NA mode, use to make transmission measurements.
For SA use to make all measurements.
Maximum: ±50 VDC, +27 dBm RF.
Side Panel
Caption
Description
Ethernet cable connector to read trace data using the FieldFox Data Link Software.
Download the latest version of the software at
http://www.agilent.com/find/fieldfox
Reserved for future use.
DC power connector used to connect to the AC/DC adapter. Maximum: 19 VDC, 4
ADC.
Micro Secure Digital slot. Use to extend the memory of the FieldFox.
Standard USB connector used to connect a power sensor for Power Meter Mode.
Also used to save files to a USB flash drive.
Use of Keyboard and Mouse is NOT supported.
Audio output jack for use with SA Mode Tune and Listen.
16
Learn More
CAT Mode on page 19
NA Mode on page 37
Ext Ref on page 148
Ext Trig (SA Mode) on
page 76
SA Mode on page 58
Learn More
On page 11
File locations on page 134
File locations on page 134
On page 69
N9912A FieldFox User's Guide
Advertisement
Chapters
Table of Contents
