Right Side Panel; Left Side Panel - Agilent Technologies N9913A User Manual

Right Side Panel

Connector Description
Ethernet cable connector to read trace data using the FieldFox Data Link
Software and connect to the FieldFox remotely.
Download the latest version of the software at:
www.agilent.com/find/fieldfoxsupport
IF Out used in SA mode for external signal processing.
Frequency Reference Source Output
Trigger Output – reserved for future development.
Secure Digital slot. Use to extend the memory of the FieldFox.
Reserved for future use.
Two standard USB connectors used to connect a power sensor for Power Meter
Mode. Also used to save files to a USB flash drive.
Use of Keyboard and Mouse is NOT supported.

Left Side Panel

Caption Description
Audio output jack for use with SA Mode Tune and Listen.
DC Voltage Source for use with external DC Bias.
DC power connector used to connect to the AC/DC adapter. Maximum: 19 VDC,
4 ADC.
Preparing for Initial Use of Your New FieldFox
Learn More
On page 212.
On page 97.
On page 209.
File locations on page 190
File locations on page 190
Learn More
On page 92
On page 210
On page 11
17