Top Panel; Side Panel - Agilent Technologies FieldFox N9912A User Manual

Top Panel

Caption Description
RF OUT For CAT and NA measurements, use to make reflection measurements.
Maximum: ±50 VDC, +23 dBm RF
Ext Trig/Ext Ref External Reference connector to connect to an external frequency
reference. Maximum: 5.5 VDC.
RF IN For CAT and NA mode, use to make transmission measurements.
For SA use to make all measurements.
Maximum: ±50 VDC, +27 dBm RF.

Side Panel

Caption Description
Ethernet cable connector to read trace data using the FieldFox Data Link Software.
Download the latest version of the software at
http://www.agilent.com/find/fieldfox
Reserved for future use.
DC power connector used to connect to the AC/DC adapter. Maximum: 19 VDC, 4
ADC.
Micro Secure Digital slot. Use to extend the memory of the FieldFox.
Standard USB connector used to connect a power sensor for Power Meter Mode.
Also used to save files to a USB flash drive.
Use of Keyboard and Mouse is NOT supported.
Audio output jack for use with SA Mode Tune and Listen.
Preparing for Initial Use of Your New FieldFox
Learn More
CAT Mode on page 20
NA Mode on page 40
Ext Ref on page 165
Ext Trig (SA Mode) on
page 87
SA Mode on page 69
Learn More
On page 12
File locations on page 151
File locations on page 151
On page 80
17