HP 8510 Option 008 Added Programming Codes
Following is the list of programming codes added for Option 008.
Programming Code
DETENORB; DETEWIDB; Select Precision Detector (10 kHz
DUTC
;
value
4
5
EXTTOFF; EXTTPOIN;
PULOHIGH; PULOLOW;
PULP;
PULW [value(time sux)];
TRID [value(time sux)];
HP 8510 Option 008 Added Query Commands
Following are the Query commands added for option 008.
11-4 Reference Data
HP 8510 Option 008 Added Programming Codes
bandwidth) Select Wide Bandwidth Detector (1.5 MHz). Selected
automatically for PULP;.
Set duty cycle limit percent maximum.
(Actual duty cycle can be less.)
Select Internal measurement trigger.
Select External measurement trigger.
Select Pulse Output active high. Select
Pulse Output active low.
PULSE PROFILE. Select Pulse Prole domain.
Set Pulse Output pulse
width. Automatically sets pulse prole sample resolution to 100
ns, 200 ns, 1
and minimum start time.
Set measurement trigger
delay.
HP 8510 Option 008 Added Query Commands
DETE?; Detector Bandwidth
PULO?; Pulse Output
EXTT?; Measurement Trigger mode
DOMA?; Domain
Description
s, or 10
s; pulse prole minimum span,