1
Introduction
This document is intended for use with the HP 8510B/C Option 008 Network Analyzer
and is a supplement to the HP 8510B/C Operating and Programming manual. It contains
descriptions of the pulsed-RF network analyzer system features for measurements in the
frequency domain and in the pulse prole domain. With respect to the standard, swept CW
system, operation of the pulsed-RF system is identical except that the measurement is made
at a specic, known time during each pulse. For information about network analysis, please
refer to HP Product Note 8510-10, HP 8510B Introductory User's Guide, for an introduction
to using the front panel for measurement setup, measurement calibration, and basic network
measurements.
Organization of This Document
This section contains a list of the chapters in this document and a brief description of the
contents of each chapter.
System Description
Introduces the HP 8510B/C Option 008 Pulsed-RF measurement capability.
Principles of Pulsed-RF Network Measurements
A list of the terms and denitions used in pulsed-RF network measurements.
Pulse Measurements Overview
A description of how the network analyzer measures pulsed-RF S-parameters versus frequency
and versus time.
Operating the HP 8510 for Pulsed-RF Measurements
Describes the setup, measurement calibration, and measurement process for setting up the
system and making pulsed-RF measurements.
Introduction 1-1