Clock Set; Data Logging, Heat Control, Tech, Stat, And Filter Control Mode - Henny Penny EVOLUTION ELITE EEG-241 Operator's Manual

6-3.

CLOCK SET

6-4.
DATA LOGGING,
HEAT CONTROL,
TECH, STAT, AND
FILTER CONTROL
MODES
March 2014
Press and hold the
1.
followed by, "SP PROG" and "ENTER CODE" show in the display.
Press the button twice more and "CLK SET" and "ENTER
2.
CODE" flash in the left display.
Enter code 1, 2, 3 (first 3 product buttons).
3.
"CS-1 ENTER DATE MM-DD-YY" flashes in the left display. Use
4.
product buttons to set the date in right display.
Press ► button and "CS-2 ENTER TIME" flashes in the left display
5.
and the time flashes in the right display. Press the ▲ or ▼, or use
product buttons, to change the time.
Press ► button and "CS-2 ENTER TIME" flashes in the left display
6.
and "AM" or "PM" flashes in the right display. Use the ▲ or ▼
buttons to choose AM or PM.
Press ► button and "CS-3 TIME FORMAT" flashes in the left
7.
display and "12-HR" or "24-HR" shows in the right display. Use the
▲ or ▼ buttons to choose a 12 hour time format or a 24 hour time
format.
Press ► button and "CS-4 DAYLIGHT SAVING TIME" flashes in
8.
the left display. Use the ▲ or ▼ buttons to choose daylight saving
time for your area: 1.OFF; 2.US (2007 & after); 3.EURO; or 4.FSA
(US before 2007).
Press and hold button to exit.
9.
The Data Logging, Heat Control, Tech, Stat and Filter Control Modes
are advanced diagnostic and program modes, mainly for Henny Penny
use only. For more information on these modes, contact the Service
Department at 1-800-417- 8405 or 1-937-456-8405.
71
button for 5 seconds until "LEVEL 2",