Clean Blower & Vents - Henny Penny EVOLUTION ELITE EEG-241 Operator's Manual

3-24.
CLEAN BLOWER &
VENTS
Figure 1
Figure 2
Figure 3
Figure 4
March 2014
To ensure proper burner operation, clean the blowers and blower vents twice
a year.
1.
Press the main power switch to the OFF position.
2.
Unplug power cord and turn gas shut-off handle clockwise to turn off
the gas, and then disconnect the gas line.
3.
Disconnect cable restraint and then carefully roll the fryer from the hood
far enough to get behind the fryer.
To avoid burns, use care when moving the fryer to prevent hot cooking oil from
4.
Using a cloth or paper towel, clean the blower intake slots to ensure
sufficient air flow to the blowers. Figure 1.
5.
Using a Phillip's-Head screwdriver, remove lower, rear panel. Figure 2.
6.
Using a cloth or paper towel, clean each blower opening. Figure 3.
7.
Clean the vent slots on the inside of rear panel, and then replace panel.
Figure 4.
8.
Reattach the gas line and turn the shut-off handle counter-clockwise to
turn on the gas and reconnect the cable restraint to the fryer.
9.
Reattach the plug to electrical receptacle and roll fryer back into place.
53
splashing.