F80 Power Saving Mode - SMC Networks ISE70G-N02-L2 Operation Manual

■[F80] Power saving mode
Power saving mode can be selected.
When selected and no buttons are pressed for 30 seconds, the product will shift to power saving mode.
<Operation>
Press the UP or DOWN button in function selection mode to display [F80].
Power saving mode
Press the UP or DOWN button to select the power saving mode.
Press the SET button to set.
In power saving mode, when buttons are pressed the display is normal, but if no buttons are pressed for
30 seconds, it will revert to power saving mode. (Power saving is only enabled in measurement mode)
During power saving mode, [ECo] will flash in
the sub display and the operation light is ON
(only when the switch is ON).
Press the SET button.
[F80] Power saving mode completed
-46-
Move on to power saving mode.
Return to function selection mode.
No.PS※※-OMV0004-H