Liebert AC4 User Manual page 55

Backup & Upload Configuration File - Backup (Service Terminal interface only)
BACKUP AND UPLOAD CONFIGURATION FILE
Backup from panel saves panel configurations
Upload to panel restores panel configurations
Select to backup or upload file
1=BACKUP CONFIGURATION FILE
2=UPLOAD CONFIGURATION FILE
3=RETURN TO SETUP SYSTEM INFO MENU
4=RETURN TO SETUP MENU
5=RETURN TO MAIN MENU
SELECT A NUMBER:1
6. Enter 1 to back up the configuration file from the Liebert AC4 to the computer and proceed to
Step 1. below,
OR
7. Enter 2 to upload the configuration file from the computer to the Liebert AC4 and proceed to
Step 1. on the next page.
NOTE: This will replace the current configuration settings in the Liebert AC4 with the most recent
backup.
To Back Up the Configuration File:
1. At the prompt to Initiate a Backup of Configuration File, enter Y (Yes - begin) or N (No -
cancel). The current setting appears in brackets—[N] in the following example.
>INITIATE A BACKUP OF CONFIGURATION FILE-YES(Y) OR NO(N)?
>[N]
>[
2.
NOTE: The following instructions refer to the Microsoft Windows HyperTerminal program. These
steps may vary for other communications programs.
3. At the top of the HyperTerminal window, shown below, click on Transfer, then on Receive File.
Vertiv | Liebert® AC4 User Manual | 55