Table of Contents
Advertisement
Date
Day (DD)
Month (MMM)
Year (YY)
Time
Hour (HR)
Minutes (MM)
Seconds (SS)
•
Press Enter to advance to the next character position.
•
When finished, press Enter again.
7.7.3 Setup Site ID
You may enter a Site ID to identify the Liebert AC4's location, using a name
that may consist of up to 40 characters (see Table 7.1 on page 41 for valid
characters). The Site ID will appear with each alarm.
To enter or change the Site ID:
•
From the Setup System Info Menu, use the arrows to choose
Setup Site ID, then press Enter.
•
To enter a Site ID:
•
Use the arrows to choose a character.
•
Press Enter to advance to the next character position.
•
If the Site ID is less than 40 characters, you may enter an
underscore (_) character to indicate the end of the name.
•
When finished, press Enter again.
7.7.4 Backup and Upload Configuration File (Service Terminal Interface only)
This operation may be performed only through the Service Terminal Interface. It permits the user to make
a copy of the Liebert AC4 configuration settings and save it as a file on the computer connected through
the RS232 port. Should the need arise, the user can upload the configuration file from the computer to the
Liebert AC4, instead of re-entering the settings manually.
To access these options:
1.
Connect to the Liebert AC4 either from a remote computer or through the RS232 port (see
Connecting to the Service Terminal Interface
2. At the Main Menu, enter 0 (zero—Setup System-Login Required).
3. At the Login Menu, enter your password.
4. At the Setup Menu, enter 5 (Setup System Information).
5. At the Setup System Information Menu, enter 4 (Backup & Upload Configuration File). The
Backup & Upload Configuration File menu appears, shown below:
Vertiv | Liebert® AC4 User Manual |
0-31
JAN-DEC
00-99
00-23
00-59
00-59
on page 70).
54
Advertisement
Table of Contents
