Liebert AC4 User Manual page 4

5.5 View Output Status
5.5.1 Output Status
6 Silence Alarm & Backup Log Files (Service Terminal Interface)
6.1 Silence Alarm (Service Terminal Interface)
6.2 Back Up Log Files (Service Terminal Interface only)
7 System and Control Options
7.1 Login
7.2 Setup System - Overview
7.3 Setup System - Setup Inputs
7.3.1 Change Label (Name of Input)
7.3.2 Define Input as Normally Open or Normally Closed
7.3.3 Define Input as Alarmable or Event
7.3.4 Set Up Alarmable Inputs in Latched or Unlatched Mode
7.3.5 Set Up Delay Time
7.4 Setup System - Setup Common Alarm
7.5 Setup System - Setup Zones
7.5.1 Set Up a Zone
7.6 Setup System - Setup Outputs
7.6.1 Define Output as Normally Open or Normally Closed
7.6.2 Define Operating or Standby Mode
7.6.3 Enable or Disable an Output Device in Alarm Status
7.6.4 Configure Output for Loss of Power ("Fail-Safe")
7.7 Setup System - Setup System Info
7.7.1 Change Password
7.7.2 Set Date & Time/Automatic Daylight Saving Time
7.7.3 Setup Site ID
7.7.4 Backup and Upload Configuration File (Service Terminal Interface only)
7.7.5 Factory Defaults
7.7.6 Perform Firmware Update (Service Terminal Interface only)
7.8 Setup Operation
7.8.1 Turn Automatic Sequencing On or Off
7.8.2 Turn Standby Testing On or Off
7.8.3 Specify Failed Standby Response
7.8.4 Specify Hold Delay Time
7.8.5 Specify Restart Time
7.9 Override Output
7.10 Clear Alarms & Logs
7.10.1 Clear Active Alarms
7.10.2 Clear the Alarm Log
7.10.3 Clear the Event Log
8 Specifications
8.1 Liebert AC4 Specifications
Vertiv | Liebert® AC4 User Manual |
36
36
37
37
37
41
41
44
44
45
46
46
47
47
48
48
49
50
51
51
51
52
52
53
53
54
54
57
57
60
60
61
63
63
64
64
66
66
66
66
67
67
4