File Management
The FieldFox can save any of the following types of files:
Current settings and calibration
Trace data (*csv and *.S1P)
Picture of the FieldFox screen
In addition, files can be saved to the internal memory, a USB Flash drive, or a
microSD card.
In this Chapter
Save Files .............................................................. 134
Recall Files ............................................................ 135
Manage Files ........................................................ 138
Manage Folders ................................................... 139
Edit Keywords ...................................................... 139
Saving and Recalling Files
Save Files
How to Save a File
Press Save/Recall 9 .
Then Save.
At the top of the current „labeler" screen (see following image) check the File
Then use the labeler to specify a filename.
How to use the FieldFox labeler
The FieldFox labeler is used to edit or change the current filename. It is also used
for many other labeling functions, such as creating a title, prefix, and keyword to
display on the FieldFox screen.
Press
Press
Press
134
Type to save and Device (Internal, USB, Storage Card) to which the file is
saved. Learn how to change these settings on page 136.
to add the cursor character to the end of the existing filename.
Select
Backspace
to erase the last character from the current filename.
to erase the current filename.
Clear
N9912A FieldFox User's Guide