Table of Contents
Advertisement
Telephone operation
Temporary tone dialing
The dial mode is preset to tone. If you do not have touch tone service, you
need to change the setting to pulse (page 9).
If you have pulse (rotary) service, you can change from pulse to tone dialing
during a call by pressing
to send touch tone signals to access telephone banking or long distance
services.
Once you have initiated your call by dialing the phone number in pulse (rotary),
press
on the handset or telephone base. Now, all subsequent key
TONE
presses will be sent as touch tone signals.
After you hang up the call, the phone returns to pulse (rotary) dialing for the
next call.
Redial list
The telephone stores the five most recently dialed telephone numbers in the
redial list. When there are already five entries, the oldest entry is deleted to
make room for the new entry. Entries are shown in reverse chronological order.
Review the redial list
1.
Press REDIAL/
2.
Press
/ CID,
VOL-
redial list.
Dial a redial entry
•
Press
, then press REDIAL/
-OR-
1.
Press REDIAL/
until the desired entry displays.
2.
Press
to dial.
Save the last redial entry to the directory
1.
Press REDIAL/
2.
Press SELECT to save the displayed number.
3.
Press
/ CID or
VOL-
step 6 & 7 of Store a directory entry on page 14).
Delete a redial entry
1.
Press REDIAL/
2.
Press
/ CID,
VOL-
desired entry.
3.
Press
/REMOVE to delete the displayed number.
CHAN
on the handset. This is useful if you need
TONE
when the handset is not in use.
PAUSE
/
or REDIAL/
VOL+
PAUSE
, then press
PAUSE
when the handset is not in use.
PAUSE
/
to select a distinctive ringer, if desired (see
VOL+
when the handset is not in use.
PAUSE
/
or REDIAL/
VOL+
repeatedly to browse the
PAUSE
to dial the last dialed telephone number.
/ CID,
VOL-
VOL+
repeatedly to browse to the
PAUSE
13
/
or REDIAL/
PAUSE
Advertisement
Table of Contents
