Dmz Host - NETGEAR CG834WG User Manual

Wireless Cable Modem Gateway CG834WG User Manual
2. In the Add MAC Filter field, specify the device name, and then click Add.
Note: If a device is listed in the Trusted Device table, you can select its radio button
to capture the MAC address. To add a device that is not listed, type a
descriptive name and then enter the MAC address for the device.
3. Select the days and times to block access.
4. Click Apply so that your changes take effect.

DMZ Host

You can designate a computer as a DMZ Host. This allows open access to the computer from the
Internet. To configure your gateway as a DMZ host:
1. Select DMZ Host to display the DMZ Host screen:
Figure 4-9
2. In the DMZ Address field, enter the last digit of the computer's IP address, and then click
Apply.
3. To stop the computer from being a DMZ host, type 0 (zero) in the DMZ Address field, and
then click Apply.
4-10
v1.0, October 2007