9.
Change the PDP Roaming protocol, if necessary:
•
None
•
IPV4
•
IPV6
•
IPV4V6
Note:
PDP roaming protocol is the IP protocol used while roaming (for
example when traveling and the roaming network does not support
IPv6).
10.
Click the + symbol next to the new APN entry.
The entry is added to the table.
To select the APN to use:
1.
Launch an Internet browser from a computer or wireless device that is connected to the
network.
2.
Enter http://m.home or http://192.168.1.1.
A login screen displays.
3.
Enter the administrator login password.
The default password is admin. The password is case-sensitive.
4.
Select Settings > Network > APN.
5.
Select the Active radio button next to the APN entry to be used.
To remove an APN entry:
1.
Launch an Internet browser from a computer or wireless device that is connected to the
network.
2.
Enter http://m.home or http://192.168.1.1.
A login screen displays.
3.
Enter the administrator login password.
The default password is admin. The password is case-sensitive.
4.
Select Settings > Network > APN.
5.
Click the x button beside the APN entry.
Enable DMZ
In a demilitarized zone (DMZ) network configuration, a computer runs outside the firewall in
the DMZ. This computer intercepts incoming Internet traffic, providing an extra layer of
Telstra Pre-Paid 4G My Pocket Wi-Fi Ultimate
Advanced Settings
52