NETGEAR CG834WG User Manual page 14

Wireless Cable Modem Gateway CG834WG User Manual
You can use the LEDs to verify connections. The following table lists and describes each LED on
the front panel of the CG834WG Gateway.
Table 1-1. LED Descriptions
LED Description
Power • On: Power is supplied to the gateway.
• Off: Power is not supplied to the gateway.
Cable Link • On (green): Configuration of the cable interface by your cable service provider
is complete.
• Off: Configuration of the cable interface is still in progress.
Upstream • Blink: Data is being transmitted to the cable interface.
Traffic • Off: The cable interface is idle.
Downstream • Blink: Data is being received from the cable interface.
Traffic • Off: The cable interface is idle.
Wireless • On: The wireless Access Point is operating normally.
Blink: Data is being transmitted or received on the wireless interface.
LAN • On (green): The port has detected link with a 100 Mbps device.
(Local Area • Blink (green): Data is being transmitted or received at 100 Mbps.
Network) • On (yellow): The Local port has detected link with a 10 Mbps device.
• Blink (yellow): Data is being transmitted or received at 10 Mbps.
• Off: No link is detected on this port.
1-2
v1.0, October 2007