Resetting To Factory Default Settings - NETGEAR CG834WG User Manual

Wireless Cable Modem Gateway CG834WG User Manual

Resetting to Factory Default Settings

You can erase the gateway configuration and reset it to the factory default settings from the Set
Password screen.
Figure 4-4
The factory default settings are shown in See "Factory Default Settings" in Appendix A.
Note: If you do not know the login password or IP address, you can use the reset
button on the rear panel of the gateway to restore the factory default settings.
On the Set Password screen, select Yes for Restore Factory Defaults, and then click Apply.
The gateway reboots automatically. The gateway's password will be password, the LAN IP
address will be 192.168.0.1, and the gateway's DHCP server will be enabled.
4-5
v1.0, October 2007