Table of Contents
Advertisement
3. Log in to the Gateway
Note: To connect to the gateway, your computer must be configured to obtain an IP
address automatically via DHCP. For instructions on how to do this, see the
link to
a. Using the computer that you first used to access your cable modem Internet service,
connect to the gateway by typing
browser. A login window opens.
Figure 1-6
Note: For security reasons, the gateway has two sets of user names and passwords:
one for a parent and one for children. Only the parent's login can be used to set
up content filtering. The child's login can configure all other features of the
gateway.
b. Log in to the gateway.
•
To log in as the parent, enter superuser for the user name and password for the
password, both in lower case letters.
•
To log in as the child, enter admin for the user name and password for the password,
both in lower case letters.
Wireless Cable Modem Gateway CG834WG User Manual
"Preparing a Computer for Network Access" in Appendix
http://192.168.0.1
v1.0, October 2007
in the address field of your Internet
B.
1-7
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
