Electrical Characteristics; Absolute Maximum Ratings - Panasonic MN103S User Manual

1.5 Electrical Characteristics

This LSI manual describes the standard specification.
Electrical characteristics given in this section are preliminary and subject to change without notice. When using
LSI, contact our sales office for product specifications.
Model CMOS LSI
Application General-purpose
Function CMOS 32-bit 1 chip microcontroller
1.5.1

Absolute Maximum Ratings

Parameter
A1 External supply voltage
A2 Internal supply voltage
A3 Flash EEPROM supply voltage
A4 Input pin voltage
A5 I/O pin voltage
A6 Peak output current
A7 Typ. range output current
A8 Operating ambient temperature
A9 Storage temperature
A10 Power dissipation
Note: Each of the absolute maximum ratings refers to limits or values that will not damage the chip even if the chip is subject to that rat-
ing. The average output current rating is applicable to any given 100-ms period. The total of the average output current of all pins
should be less than 50mA. Insert at least one 10 µF or higher bypass capacitor between each power supply pins (VDD pins) and
ground. Additionally, insert at least one 1 µF or higher bypass capacitor between internal each power supply pins (V
ground.
Additionally, insert at least one 2µF or higher bypass capacitor between Flash EEPROM power supply pins (V
ground.
It is recommended that total capacitance between all of the VDD and VSS is more than 10-times sum of capacitance between all
of the VDD2 and VSS plus capacitance etween VDD3 and VSS.
Symbol
V -0.3 to +7.0
DD
V -0.3 to +2.5 V
DD2
V -0.3 to +4.6 V
DD3
V -0.3 to VDD +0.3 (upper limit: 7.0)
I
V -0.3 to VDD +0.3 (upper limit: 7.0)
IO
IOPEAK
IOAVG
TOPR -40 to +85
TSTG -40 to +125
PD
Rating
±10
±5
600
Electrical Characteristics
Chapter 1
Overview
V =0.0 V
SS
Unit
V
V
V
V
V
mA
mA
°C
°C
mW
pins) and
DD2
pins) and
DD3
I - 17