Konica Minolta Bizhub C203 Installation Manual page 30

Set up the PayCon
Set up the PayCon
Turn on the PayCon. Refer to the technical PayCon Copy manual for handling the PayCon menu and changing settings.
The settings in the PayCon can be find in the tree-top menu structure of the PayCon. To simplify thing, we will use a
graphic representation of this menu to show you where the setting can be found.
The steps are represented by icons:
Insert your service card and enter the menu
Optional ECOS module
Press 1
Press 2
Press 3
Press 4
Press 5
Press 6
Press 7
Press 8
Press 9
Press OK
Use the , ,
The and buttons can also be used as the
Look for all the actions of the buttons in the PayCon technical manual.
Behaviour
1. Where is the credit value kept?
a. On the card (SVC), you will need to use cards of the chipcard or Mifare card type and the
Payment Option', continue with step 2.
b. On the server (SVS), go to step 3.
c. On the PayCon terminal, you will need
2. Stored Value on Card:
a. If you use Mifare continue with 2b, if you use chipcards go to step 2d
b. , Go to 'Main Menu' => 'Card / ID' => 'ID Tags' => 'Mifare' => 'Mode'.
c. Select 'Disabled', press
, Go to 'Main Menu' => 'Card / ID' => 'Server Accounts' => 'Tags' => 'Inepro SLE'.
d.
e. Select 'Disabled' and press
f. Do you use Pcounter? if you do, continue with step 3, if you don't, go to step 8.
3. Do you use Cost Centres (Client Codes) in the PayCon System*?
* Sub Client Codes are not supported.
26 - Konica Minolta Kit - Bizhub 132360
Press Dot
Press 0
Press #
Press +
Press -
Press F
Press Stop
Press ?
Press the Flag
Press Correction
and to navigate, the
ECOS 'KM - I - Local Accounts', go to step 4.
and go to step 2f.
.
to edit the value, the to confirm and the
and buttons to navigate.
to cancel.
ECOS 'KM - PayCon