Xtreme Ice Training Manual
Preventative Maintenance Sequence
The installation is not complete until you are sure the owner-operator understands the cuber operation
and his or her responsibility of preventative maintenance.
Does the owner-operator know:
1.
Location of electrical disconnect switch and water shut-off valves?
2.
How to start and/or shut down the product, clean and sanitize it?
3.
Bin full operation and reset operation of high pressure cutout (water-cooled and remote
products and 500 series (Air Cooled)?
4.
How to clean the condenser and fan blade?
5.
Whom to call for product information and/or service?
NOTE: CONDENSER SENSOR USED ONLY ON A/C UNITS. 1.8K ohm RESISTER USED ONLY ON
W/C & R/C UNITS.
October 17, 2005
9
TP00952