Husqvarna Viking Sapphire 960Q User Manual page 38

SEWING SETTINGS
Twin Needle
Touch the Twin Needle icon to open a list for twin needle width
selections. When a twin needle size is selected, the width of all stitches
is limited for the selected twin needle size to prevent needle breakage.
The setting is kept until you turn the twin needle width to off.
Stitch Width Safety
presser foot. The needle position is locked to center for all stitches to
prevent damage to the needle, presser foot or needle plate.
When turning on the machine with this setting activated and for every
stitch selection that is not a straight stitch, a pop-up message informs
back to normal sewing.
Note: Twin Needle and Stitch Width Safety cannot be used at the same time.
Selective Thread Cutter auto for sewing
the presser foot raises when you have completed a buttonhole, when
auto for sewing will be performed.
Sensor Presser Foot Lift
foot will raise to pivot height when you stop sewing with the needle in
the down position. When deselected, the presser foot will stay lowered
even if the machine stops with the needle in down position or after a
thread cut.
FIX Auto
FREQUENTLY USED ICONS
OK
Cancel
Cancels settings and changes and returns to previous window.
Touch & Hold
lower right corner. To access these functions, Touch & Hold the icon
for a few seconds.
3:8