Cable Connection - Planet IXT-705AT User Manual

The wire gauge for the terminal block should be in the
range between 12 and 24 AWG.
Note

3.5 Cable Connection

„ Installing the SFP+ Transceiver
The sections describe how to insert an SFP+ transceiver into an SFP+
slot.
The SFP+ transceivers are hot-pluggable and hot-swappable. You can
plug in and out the transceiver to/from any SFP+ port without having
to power down the Industrial Media Converter
MTB Series
Transceiver
Figure 3-1: Plug in the SFP+ Transceiver
It is recommended to use PLANET SFP+s on the Indus-
trial Media Converter. If you insert an SFP+ transceiver
that is not supported, the Industrial Media Converter will
Note
not recognize it.
„ 10GBASE-X SR/LR:
Before connecting the other switches, workstation or Media Converter,
please do the following:
17