Table of Contents
Advertisement
You must use the screws supplied with the mounting brackets.
Damage caused to the parts by using incorrect screws would
invalidate your warranty.
3.5 Cable Connection
Installing the SFP+ Transceiver
The sections describe how to insert an SFP+ transceiver into an SFP+ slot.
The SFP+ transceivers are hot-pluggable and hot-swappable. You can plug in
and out the transceiver to/from any SFP+ port without having to power down
the Media Converter
It is recommended to use PLANET SFP+
Media Converter. If you insert an SFP+ transceiver that is not
supported, the Media Converter will not recognize it.
10GBASE-X SR/LR:
Before connecting the other switches, workstation or Media Converter, please
do the following:
1. Make sure both sides of the SFP+ transceiver are with the same media
type; for example, 10GBASE-SR to 10GBASE-SR, 10GBASE-LR to 10GBASE-
LR.
MTB Series
Transceiver
Figure 3-2: Plug in the SFP+ Transceiver
transceiver
on the
17
Advertisement
Table of Contents
