Indesit ISL70CNL Service Manual page 61

Pump switch and float
1. Remove the Lx side panel
2. Release the two clips securing the cover of the
reservoir to the base
4. Replace the pump / switch or float
heater unit - safety thermostats - NTC sensors
1. Remove the guard from the heater unit
Service Manual
Yate Production Dryers
3. Release the reservoir from the base (Rx and
Lx)
2. Disassemble the unit, undoing the two screws
securing it to the guard
3. To replace the heating element, first disconnect
the power cable from the mainboard
Edition
2006.09.21
E
Language
English
n
6