Indesit ISL70CNL Service Manual page 51

CORRECTIVE ACTIONS
Check the belt.
CORRECTIVE ACTIONS
Check the seals.
Check the Onaysan type on condenser unit.
CORRECTIVE ACTIONS
Batch issue with thermostat up to Date code 33 – Flash
on internals of one shot thermostat.
Check the condenser.
CORRECTIVE ACTIONS
Check the door switch.
Service Manual
Yate Production Dryers
No drum action
INTERVENTION TO BE PERFORMED
- C. Adrift from the jockey pulley or broken caused by
the jockey wheel movement (S/N before the 19th of
October 2004): improve the bearing & plastic moulding
fi tment substituting with the part code C00113879.
- C. Off or broken by pulley bracket bending (S/N before
the 15th of March 2005): substitute pulley. Part code
C00113879.
Leaking
INTERVENTION TO BE PERFORMED
- C. Condenser unit black seal unsecure or broken:
substitute, part code C00113903.
- C. Black 'L' shaped seals between airduct and base
fallen out (S/N before the 10th of May 2005): substitute
with orange pipa seal (part code C00113859).
- C. Substitute the seal (part code 1702981) or, if the
S/N is before the 1st of August 2005, (part code
C00113890).
No heat
INTERVENTION TO BE PERFORMED
- C. If the S/N is before the September 2004 (sup-
plier corrective action): substitute with the part code
C00116598.
- C. Fitted upside down (S/N before the 19th of October
2004): substitute with the one where added the third
clip to prevent wrong fi tment and the arrows to show
the correct orientation (part code C00113890).
Dead
INTERVENTION TO BE PERFORMED
- C. Adrift (S/N before the 7th of December 2004): add
screw to secure door switch retaining tab.
- C. Broken (S/N before the 6th of June 2005): change the
door catch from EMZ to Metafl ex. Latch change to suit
metafl ex and clip in blanking pieces. No fi xing screws
required for the blanking pieces fi tted to the front panel
and door liner (door kit part code C00141611).
Edition
2006.09.21
E
Language
English
n
5