Yaesu FTM-7250DR Advance Manual page 40

Menu Selection Details
45 STEP
Function: Sets the frequency synthesizer steps.
Available Values: AUTO / 5 / 6.25 / 8.33* / 10 / 12.5 / 15 / 20 / 25 / 50 / 100 (kHz)
Default: AUTO
*: AIR Band
46 TEMP
Function: Indicates the final transistor & heatsink temperature.
47 TONE FRQ
Function: Setting of the CTCSS Tone Frequency.
Available Values: 50 standard CTCSS tones
Default: 100.0 Hz
CTCSS TONE FREQUENCY (Hz)
67.0 69.3 71.9
88.5 91.5 94.8
114.8 118.8 123.0 127.3 131.8 136.5 141.3 146.2
151.4 156.7 159.8 162.2 165.5 167.9 171.3 173.8
177.3 179.9 183.5 186.2 189.9 192.8 196.6 199.5
203.5 206.5 210.7 218.1 225.7 229.1 233.6 241.8
250.3 254.1 -
48 TOT
Function: Sets the Time-Out Timer.
Available Values: 0.5 MIN - 10.0 MIN (0.5 MIN step) / OFF
Default: 3.0 MIN
The time-out timer shuts off the transmitter after continuous transmission of the
programmed time.
49 TS MUTE
Function: Enables/Disables the receiver audio output while the Tone Search or DCS
Search Scanner is activated.
Available Values: ON / OFF
Default: ON
50 TS SPEED
Function: Selects the Tone Search or DCS Search Scanner speed.
Available Values: FAST / SLOW
Default: FAST
51 VER DISP
Function: Displays the transceiver software version.
Available Values: CPU / DSP
74.4 77.0 79.7
97.4 100.0 103.5 107.2 110.9
- - -
82.5 85.4
- -
39