Yaesu FTM-7250DR Advance Manual page 36

Menu Selection Details
22 GM INTVL
Function: Selects the automatic GM beacon interval.
Available Values: NORMAL / LONG
Default: NORMAL
23 LCD DMMR
Function: Setting of the front panel display's illumination level.
Available Values: LEVEL 1 - LEVEL 4
Default: LEVEL 4
24 LOCK
Function: Selects the Control Locking Lockout combination.
Available Values: KEY+DIAL / PTT / KEY+PTT / DIAL+PTT / ALL / KEY / DIAL
Default: KEY+DIAL
25 MIC GAIN
Function: Adjust the microphone gain level.
Available Values: LEVEL 1 - LEVEL 9
Default: LEVEL 5
26 MEM NAME
Function: Programming an Alpha/Numeric label for a Memory Channel.
See page 18 for details.
27 MW MODE
Function: Selects the method of selecting of channels for Memory Storage.
Available Values: NEXT CH / LOWER CH
Default: NEXT CH
NEXT CH: Stores the data into the memory channel which is next-highest from the
last-recalled
LOWER CH: Stores the data into the lowest-available "free" channel.
28 OPEN MSG
Function: Selects the Opening Message that appears when the radio is powered ON.
Available Values: DC / MESSAGE / OFF
Default: MESSAGE
DC: DC supply voltage
MESSAGE: Set by user. See below.
OFF: No Opening Message
Here's how to program the Opening Message:
1. Set this Set Mode Item to "MESSAGE".
2. Press the [ V/M ( MW )] key momentarily to enable programming of the opening mes-
sage. You will notice the first character entry's location blinking.
3. Rotate the DIAL knob to select the first letter/number of the message, and then press
the [ V/M ( MW )] key momentarily to move to the next character.
memory channel.
35