Install A Front Fan - Lenovo ThinkSystem ST550 7X09 Maintenance Manual

Step 2. Press down the release tab and pivot the front fan as shown. Then, take the front fan out of the
chassis.
Figure 45. Front fan removal
After removing the front fan:
1. Install either a new front fan or a fan filler for proper air flow. See "Install a front fan" on page 76.
2. If you are instructed to return the old front fan, follow all packaging instructions and use any packaging
materials that are provided.

Install a front fan

Use this information to install a front fan.
"Read the
installation
Guidelines" on
page 59
To install a front fan, complete the following steps:
Watch the procedure. A video of the installation process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-Acsjj4tU79GzKnWG316BYn
• Youku: http://list.youku.com/albumlist/show/id_50483452
Step 1. Touch the static-protective package that contains the new front fan to any unpainted surface on
the outside of the server. Then, take the new front fan out of the package and place it on a static-
protective surface.
76
ThinkSystem ST550 Maintenance Manual
"Power off
the server
for this task"
on page 12
"ATTENTION:
Static Sensitive Device
Ground package before opening"
on page 60