The Boot Sequence Menu - Siemens SIMATIC Box PC 840 Manual

5.6

The Boot Sequence Menu

This menu allows you to prioritize the boot devices.
Main
+ Diskette Drive
Removable Device
+
Hard Drive
+
ATAPI CD-ROM Drive
Intel Boot Agent
F1 Help
ESC Exit
Figure 5-16
This menu lists the boot devices in groups. The group with the highest priority is at
the top. The procedure for changing the sequence is as follows:
Use the ↑↓ keys to select a group and the + or – keys to move the group to its
new position in the sequence.
Note
During booting the boot drive can be selected with the ESC key. IntelR Boot
Agent is only displayed if, beforehand, the LAN Remote Boot function has been
set to "Enabled" in the hardware options menu.
SIMATIC Box PC 840 Manual
A5E00085984-04
PhoenixBIOS Setup-Utility
Advanced Security Power
Select Item
+ / – Change Values
Select Menu Enter Select
The "Boot Sequence" Menu
Configuring the SIMATIC Box PC 840
Boot Sequence Version Exit
Item Specific Help
Keys used to view or configure
devices:
<Enter> expands or collapses
devices with a + or –
<+> and <–> moves the device up or
down.
<Ctrl+Enter> expands all
F9 Setup Defaults
Sub-Menu F10 Save and Exit
5-21