Table of Contents
Advertisement
SIMATIC Box PC 840 to PG Connection (V.24, TTY)
If you want to connect your SIMATIC Box PC 840 to a programming device, you
can plug the appropriate connecting cable into the V.24 or TTY interface port
Tabelle 3-2
Port
COM 1 as a V.24
port
COM 1 as a TTY
port
Notice
1. When connecting the programming devices in series, make sure you connect
the cable the right way around (see Figure 3-13).
2. The connecting cable can only be ordered as a spare part. The connecting
cable is described in Chapter 7.
3. The line current (TTY) is an optional product feature.
Box PC 840
Figure 3-13 Direction of Connection: Adapter – Connecting Cable
Notice
For the PC/PG connection, you must switch the TTY ports (COM 1) in the
programmable logic controller to passive by changing the jumper setting. The
SIMATIC Box PC 840 interface is always active!
SIMATIC Box PC 840 Manual
A5E00085984-04
Setting Up and Operating the SIMATIC Box PC 840
Connection of the SIMATIC Box PC 840 to other PUs
Link
with PG 7xx
with PG 6xx
Adapter
Active
6ES5 731–6AG00
Connecting Cable
Order No.:
2)
6ES5 733-5BD20
Series connection of
2)
6ES5 733 -2xxx0
and
1)
6ES5 731-6AG00
Connecting cable
Passive
PG 6XX
6ES5 733–2xxx0
Adapter
6ES5 731-6AG00
3-19
Advertisement
Table of Contents
