Siemens SIMATIC Box PC 840 Manual page 88

Configuring the SIMATIC Box PC 840
System Time und System Date Time and Date
System Time and System Date indicate the current values. Once you have
selected the appropriate option, you can use the [+] and [–] keys to modify the time
setting
Hour:Minute:Second
and the date
Month/Day/Year.
You can move between the entries in the date and time options (for example, from
hour to minute) using the tabulator key.
Diskette A Disk Drive
The type of floppy drive installed in the PC is set here. The following entries are
possible:
[Disabled]
[1.44 MB, 3 1/2"]
Primary Master Primary Slave Secondary Master/ Secondary Slave
The system jumps to the following submenu when you select this type of menu
field:
Main
Primary Master [4326MB]
Type:
Total Sectors
Maximum Capacity
Multi-Sector Transfers:
LBA Mode Control:
32 Bit I/O:
Transfer Mode:
Ultra DMA Mode:
F1 Help
ESC Exit
Figure 5-3 Primary Master
5-6
If there is no disk drive or LS 240 drive. Default setting for an installed
LS 240 drive.
Default setting for an installed disk drive A
PhoenixBIOS Setup Utility
[Auto]
LBA Format
[40031712]
20496MB
[16 Sectors]
[Enabled]
[Enabled]
[FPIO 4 / DMA 2]
[Mode2]
Select Item + / – Change Values
Select Menu Enter Select
Item Specific Help
[AUTO] (recommended)
Autotypes installed
IDE-devices
[USER]
Enter parameters of
IDE-devices installed
at this connection
F9 Setup Defaults
Sub-Menu F10 Save and Exit
SIMATIC Box PC 840 Manual
A5E00085984-04