Load The Retransfer Film - DataCard CR500 User Reference Manual

Datacard CR500 User Reference Guide
6. Insert the loaded ribbon cartridge in the printer until it clicks into position.
7. Close the print unit door.
8. On the print unit front panel, press Reset and then Return to initialize the ink
ribbon.
9. Close the security enclosure door to lock the printer.
10

Load the Retransfer Film

When the retransfer film runs out, "Media Run Out" displays on the print unit front
panel, and message 162, "Retransfer film out," displays on the touch screen. The
left column of the touch screen supplies gauge shows white, not green.
Do the following to load the retransfer film cartridge.
1. Unlock the printer and open the security enclosure.
2. On the print unit, slide the door latch up and open the print unit door.
3. Press the retransfer film cartridge eject button and remove the green
cartridge.
3
Load Supplies
1
2
11