Table of Contents
Advertisement
TELUS Mobility™
Diagnostic Menu
The iR1200 modem Diagnostic Menu provides you with commands to help analyze problems with the modem. The menu
contains actions that call the modem and receive diagnostic information.
The following table outlines the types of information that can be retrieved with commands on the diagnostic menu.
Command
1 – Reset
This command resets the radio
section of the modem.
2 – Master Reset
This command is used when
certain changes are made to the
firmware and the modem needs to
acquire the changes.
3 – Signal
This determines the quality of the
Quality
signal.
4 – Signal
This determines the signal
Strength
strength of the modem.
5 – Packet Data
This will check for packet data
Registration
registration status.
Information
6 – Channel
This determines if channel data
Information
has been obtained.
7 – Stored
This provides the modem's preset
Parameters
parameters.
8 – DNS IP
Displays the address of the
Address
Domain Name Server.
9 – Modem Pass-
Allows you to issue Hayes
Thru Mode
compatible AT commands to the
modem during diagnostic port.
28
Action
WARNING: We do not recommend that you perform this
command unless otherwise instructed by an eLutions'
Customer Care representative.
Signal quality can be 0 – 100
Signal strength can be 0 – 100.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Reply
Service type: PACKET
VALID NEI: (IP Address of the Modem)
Registration Status: REGISTERED or
UNREGISTERED
MIP Registration Status: REGISTERED or
UNREGISTERED
Area
RSSI
Channel
State
TX Level
Flow Control
Character Framing
Service Class
DTE-side Stack
WDS-side Stack
Mobile IP Activation
Mobile UP Registration Lifetime
Security Parameter Index
Home Agent IP Address
+WPNEI Prefix Length
Request Broadcast Datagrams
DCE IP Addresses
DTE IP Addresses
Data Encryption
Data Compression
Header Compression
www.telusmobility.com
Advertisement
Table of Contents
