Communication Indicators; Packet Data; Circuit Switched Data; Figure 13 - Ir1200 Front Panel Layout - TELUS iR1200 Installation Manual

TELUS Mobility™

Communication Indicators

Your
iR1200 modem is equipped with LED indicators (see Figure 13 on page 24) that identify various communication functions.
Signal Color
Blinking
Tx
Green
Blinking
Rx
Green
Green
RTS
(Off)
Green
CTS
(Off)
Green
DTR
(Off)
Green
DSR
(Off)
STATUS Solid Red
NOTE: STATUS indicators differ, depending on the type of mode the modem is operating in.
The following tables describe the STATUS indicators for the Packet Data and Circuit Switched Data operating modes.

Packet Data

Blinking
STATUS
Green
Blinking
STATUS
Green

Circuit Switched Data

Blinking
STATUS
Green
Solid
STATUS
Green
24
Figure 13 – iR1200 Front Panel Layout
Modem is transmitting data to the computer data terminal (DTE).
Modem is receiving data from the computer. Modem is receiving data from the DTE.
Request To Send from computer (DTE) is asserted (not asserted).
Clear To Send from modem is asserted (not asserted).
Data terminal equipment is ready (not ready).
Modem is ready (not ready).
The modem is searching for signal within the iDEN
changes from blinking green back to solid red, the signal has been lost and the modem is
attempting to re-acquire.
NOTE: If after a period of several minutes the status does not return to green, you may be
out of range. The modem will attempt to re-acquire automatically when you are back
in range.
In-range (modem is connected to the iDEN
The modem is in use – iDEN
In-range (modem is connected to the iDEN
The modem is in use – iDEN
Indication
®
network. If the modem status
®
network) but idle (not passing data).
®
network communication is active and is passing data.
®
Network) but idle (not passing data).
®
network communication is active and is passing data.
www.telusmobility.com