Table of Contents
Advertisement
Route and Connect Data Cable(s)
Connect the data cable(s) as described for the standard mobile installation on page 15.
Configuration for Docking Station
This configuration allows the power supplied to the modem to be controlled by a docking station that may be mounted inside the
vehicle.
NOTE: Please refer to the manufacturer's instructions for proper installation of your specific docking station.
Mounting the Modem
Mount the modem as described for the standard mobile installation on page 11.
Mounting the Antenna(s)
Mount the antenna(s) as described for the standard mobile installation on page 12.
Route and Connect Power Cable
Route and connect the DC power cable as described for the standard mobile installation on page 14.
Route and Connect Ignition Cable
Route the Ignition cable using the following diagram as a guideline:
www.telusmobility.com
GPS ANTENNA
(OPTIONAL)
FUSE
+12V DC
VEHIC LE
BATTE RY
DOCKING
STA TION
CONTROLL ED
POW ER
+12V DC
(FUSED)
Figure 10 – Docking Station Configuration
Figure 11 – Wiring Diagram for Docking Station
MOBILE DATA
COMPUTER
MODE M
ANTENNA
iR1200
POW ER
IGNITION
iR1200 Modem
RS-232
GPS DATA
RS-232
MODEM DATA
17
Advertisement
Table of Contents
