MX 900 Series Installation Guide
Multiport Cable
The MX 900 Series terminals can use a multiport cable to make the following
connections:
■
■
■
■
■
■
■
Note:
Caution:
The following precautions must be taken with multiport cables:
■
■
■
■
May 13, 2015
ECR Tailgate
Ethernet LAN
Serial cable
USB Host
USB device
Power input
Audio output
Some multiport cables require additional cabling to work; for example a
pigtail for certain ports or Ethernet cable.
Multiport Cable, P/N 23740-02 Rev. A
Improper installation or removal of the terminal connector may
permanently damage the MX 900 Series terminal.
Use the Ethernet port on the I/O module only if the multiport cable is not
attached. Otherwise, use the Ethernet port on the multiport cable.
Do not force the terminal connector into place.
Always make sure that all of the pins are lined up in correct parallel
fashion before applying light pressure to snap the terminal connector into
place.
Disconnecting the power source during transaction processing may cause
loss of transaction data.
Ethernet
+12V
Audio
USB
COM 1
COM 2
27