MX 900 Series Installation Guide
3. Before connecting the terminal to the power pack, complete the
Stand Mount
In most retail spaces, the terminal is positioned on a stand mount.
Stand Mount Installation
To install the terminal on the stand mount:
1. Install the stand mount on the countertop in the desired lane over an
2. Thread all wiring connections through the center of the stand mount.
3. Make all wiring connections.
4. Align and seat the three pins on the top plate of the stand mount
5. Slide the terminal down until the unit seats securely.
6. Position the stand so that it is protected from being bumped or damaged
May 13, 2015
Warning:
Do not use the MX 900 Series terminal near water, including a
bathtub, wash bowl, kitchen sink, or laundry tub. Do not use
in a wet basement or near a swimming pool.
installation by connecting all the cables (see Connecting the Device and
Power Up with the Multiport Cable).
appropriate hole through which the wiring connections can be threaded.
platform with the three key-hole slots on the bottom of the terminal.
by shopping carts or other items.
5