Samsung SCX-5530FN/XAZ Service Manual page 61

4.3.6 In the fuser area or around the toner cartridge
Note : The fuser area is hot. Take care when removing
paper from the machine.
1. Open the front cover and pull the toner cartridge out,
lightly pushing it down.
4.3.7 In the paper exit area
1. Open and close the front cover. The jammed paper is
automatically ejected from the machine.
2. Gently pull the paper out of the output tray.
If you do not see the jammed paper or if there is any
resistance when you pull, stop and go to the next
step.
3. Open the rear cover.
Samsung Electronics
2. Remove the jammed paper by gently pulling it straight
out.
3. Replace the toner cartridge and close the front cover.
Printing automatically resumes.
4. If you see the jammed paper, push the pressure lever
on each side up and remove the paper. Skip to step 9.
1
If you still do not see the paper, go to the next step.
Alignment and Adjustments
1
pressure lever
Service Manual
4-7