5.27 LSU
1. Before you remove the LSU, you should remove:
- Middle Cover Ass'y (Refer to 5.21)
5.28 CRUM2 PBA
1. Before you remove the CRUM2 PBA, you should
remove:
- Middle Cover Ass'y (Refer to 5.21)
- LSU (Refer to 5.27)
Samsung Electronics
2. Remove the four screws securing the LSU and
remove it.
2. Remove the one screw securing the CRUM2 PBA
and remove it and then release the four Terminals, as
shown below.
CRUM2 PBA
Terminal
Notice : Be aware of the Terminals to ensure they are
not lost.
Disassembly and Reassembly
LSU
Service Manual
5-35