5.10 Platen Ass'y
1. Before you remove the Platen Ass'y, you should
remove:
- Side Cover Left, Right (Refer to 5.7)
- OPE Unit (Refer to 5.8)
- ADF Ass'y (Refer to 5.9)
2. Remove the two screws securing the Platen Ass'y, as
shown below.
3. Remove the one screw securing the Ground Cable
and unplug the four connectors and CCD Cable.
ADF Ground
Cable
Samsung Electronics
4. Lift the Platen Ass'y in the direction of arrow, as shown
below.
5. Remove the four screws securing the Scan Upper.
Disassembly and Reassembly
Platen Ass'y
Service Manual
5-15