Samsung SCX-5530FN/XAZ Service Manual page 107

5.11 Shield Controller Ass'y
1. Before you remove the Shield Controller Ass'y, you
should remove:
- Side Cover Left (Refer to 5.7.4)
2. Unplug the all connectors and remove the one screw
securing the Ground Cable.
3. Remove the five screws securing the Shield Controller
Ass'y and remove it.
Samsung Electronics
Shield Controller Ass'y
4. Remove the five screws securing the Main PBA to the
Shield and unplug the Film Cable and then remove
the Main PBA.
Main PBA
Film Cable
Shield
5. The connectors are located, as shown below.
Flat Cover
ADF Flat Motor
Network
Port
USB
Port
Parallel
Port
SCF Con
Modem PBA
Disassembly and Reassembly
CCD
OPE Panel
USB Host
Cartridge
LSU_5V
LSU
Thermistor
MPF_SEN
MPF
REGI
Pick Up
BLDG
Engine
Duplex Motor
Service Manual
5-19