Digital Radio; Digital Radio Basic Operation - Kenwood DNX9180DABS Instructions Manual

Digital Radio

Digital Radio

Digital Radio Basic Operation

Most functions can be controlled from the
source control screen.
To enter Digital Radio source, touch [Digital
Radio] icon in the source selection screen.
(P.13)
NOTE
• Set the remote control mode switch to AUD
mode before starting operation, see Switch the
operation mode (P.76).
Control screen
3
7
8
4
5
Open the drawer
8
Close the drawer
7
8
Indicator display
1
Displays the received signal strength.
Information display
2
Displays the information on the current station:
Service Name
Touching [ ] allows you to switch between
Content A, Content B and Content C.
42
(DNX9180DABS)
2
6
1
6
2
6
9
Content A: DLS, PTY Genre
Content B: Song Title, Artist Name, Ensemble
name
Content C: Now Playing, Next Program, Audio
Quality
Touch to switch between the Control and
Information screen.
Seek mode
3
Touch to switch seek modes in the following
sequence: [AUTO1], [AUTO2], [MANUAL].
• [AUTO1]: Tunes in a ensemble with good
reception automatically.
• [AUTO2]: Tunes in the memorized ensemble
one after another.
• [MANUAL]: Switches to the next ensemble
manually.
Indicator display
4
P#: Preset number
CH#: Channel display
Operation keys
5
• [1] : Displays the Service List screen. For details
on search operation, see Service search
(P.43).
• [E] [F] : Tunes in a ensemble, service, and
component. The seek mode switching can be
changed. (see Seek mode).
3
• [ ] : Touch to mute or not to mute.
Preset list
6
• Touching [ ] allows you to change the
]/ [
display size.
• Recalls the memorized service.
• When touched for 2 seconds, stores the
currently being received service in the
memory.
Artwork area/ Analog meter
7
• Displays/hides artwork area.
• The picture data is displayed if available from
current content.