Kenwood DNX9180DABS Instructions Manual page 58

Other External Components
[Front Camera Settings *]
■
Adjusts the CMOS-3xx series with ID 2 ("Front
Camera") set. For details, see the instruction
manual of your camera.
[Front Camera Interruption] *
■
[10 sec]/ [15 sec] (Default)/ [20 sec]: The front
camera screen is displayed when return the
gear from the reverse (R) position.
[OFF]: Cancel.
*1 When CMOS-3xx series is connected with
this unit.
*2 When CMOS-3xx series or front camera is
connected with this unit.
58
To adjust the parking guidelines
1
2
1
2
3
4
NOTE
• Install the rear view camera in the appropriate
position according to the instruction manual
supplied with the rear view camera.
• When adjusting the parking guidelines, make
sure to apply the parking brake to prevent the car
from moving.
Touch [ON] of [Parking Guidelines] in the
Camera screen. (P.57)
Touch [Guidelines SETUP] on the Camera
screen.
Adjust the parking guidelines by
selecting the mark.
Adjusting the position of the selected
mark.
C
Make sure that lines A and B are
horizontally parallel, and that lines C and
D are of the same length.
NOTE
• Touch [Initialise] and then touch [Yes] to set all
the marks to their initial default position.
A
D
B