Navigation Setup - Kenwood DNX9180DABS Instructions Manual

Navigation Setup

1
Press the [MENU] button.
h Popup menu appears.
h
2
Touch [SETUP].
h SETUP Menu screen appears.
h
3
Touch [Navigation].
h Navigation SETUP screen appears.
h
4
Set each item as follows.
[NAV Mute]
■
Mutes the volume of rear speakers during
voice guidance of the navigation system.
Default is "ON".
[NAV Interrupt Speaker]
■
Selects speakers used for voice guidance of
the navigation system.
• [Front L]: Uses the front left side speaker for
voice guidance.
• [Front R]: Uses the front right side speaker
for voice guidance.
• [Front All] (Default): Uses both front
speakers for voice guidance.
[NAV Voice Volume]
■
Adjusts the volume for voice guidance of the
navigation system. Default is "24".
Inserting the MAP SD
1
Press the [G] button.
2
Touch [OPEN] to the panel fully opens.
3
Insert the SD card into the slot until it
clicks.
Ñ
Remove the SD card
1
Press the [G] button.
2
Touch [OPEN] to the panel fully opens.
3
Push the SD card until it clicks and then
remove your finger from the card. The
card pops up so that you can pull it out
with your fingers.
4
Press the [G] button.
Basic Operations
19
English