Table of Contents
Advertisement
Return to the Top page
Radio, Digital Radio, TV
Digital Radio Basic Operation (DNX4330DAB only)
Most functions can be controlled from the source control screen.
NOTE
•
Set the remote controller mode switch to AUD mode before starting operation, see Switching the operation
mode
(P.109).
Simple Control screen
7
1
5
2
3
4
1 Artwork area
The picture data is displayed if available from current content.
2 Multi function key
Touch to switch the multi function menu. For details on the menu, see Multi function menu
3 Preset key/Multi function menu
Recalls the memorized station or channel. When touched for 2 seconds, stores the current receiving
station or channel in memory.
When switched, various functions can be performed by using keys in this area.
For details on the menu, see Multi function menu
4 List switching key
Touch to switch between the preset list and the information list.
5 Sub function menu
The following functions can be performed by using keys in this area.
• Display the list type screen: Touch [
]. See Selecting Operation
• Tunes in a ensemble, service, and component:
Touch [1] [¡]. The method of ensemble, service, and component switching can be changed. See
Multi function menu
(P.55).
• Display the Dynamic Label Segment screen: Touch [DLS].
• Change the Replay mode: Touch [
]. See Replay
6 Label infomation
Displays the list of preset service.
Displays the information of the current service: Service Label, PTY Label, Ensemble Label, Audio Quality,
Now playing, Next program, Title, Artist
7 Signal Strength indication/Channel display
Displays the received signal strength of the Digital Radio station.
Displays the received channel number display.
56
56
List Control screen
1
7
6
5
2
3
4
(P.55).
(P.55).
(P.61).
(P.63).
Multi function menu
The functions of each key are as follows.
[
]
Switches the preset number.
[P1] - [P15]
Selects the preset ensemble. Touch for 2 seconds to store the current ensemble into the preset
memory.
[TI]
Sets the traffic information mode on. For details, see Traffic Information
[SEEK]
Switches the seek mode in the following sequence; [AUTO1], [AUTO2], [MANUAL].
• AUTO1: Tunes in a ensemble with good reception automatically.
• AUTO2: Tunes in ensemble in memory one after another.
• MANUAL: S witches to the next ensemble manually.
[PTY]
Searches a program by setting program type. For details, see Search by program type
[ REAR
]
Touch to mute the rear speaker.
[
SETUP]
Touch to display the SETUP Menu screen. See Setting Up
[
AUDIO]
Touch to display the Audio Control screen. See Controlling Audio
Return to the Top page
Radio, Digital Radio, TV
(P.63).
(P.62).
(P.80).
(P.94).
57
Hide quick links:
Advertisement
Table of Contents
