Navigation Setup - Kenwood DNX8160S Instruction Manual

Setting Up
Adjusting the parking guidelines
1
Touch [ON] of [Parking Guidelines] in
the Camera screen.
2
Touch [Guideline Setup] in the Camera
screen.
3
Adjust the parking guidelines by
selecting the mark.
4
Adjusting the position of the selected
mark.
C
Make sure that A and B are horizontally
parallel, and that C and D are the same
length.
NOTE
• Touch [Initialize] and after touch [Yes] to set all
the marks to the initial default position.
80 80
A
D
B

Navigation Setup

You can set navigation parameters.
1
Press the <MENU> button.
Popup menu appears.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Navigation].
Navigation SETUP screen appears.
4
Set each item as follows.
NAV Mute
Mutes the volume of rear speakers during
voice guidance of the navigation system.
Default is "ON".
NAV Interrupt Speaker
Selects speakers used for voice guidance of the
navigation system.
Front L: Uses the front left side speaker for
voice guidance.
Front R: Uses the front right side speaker for
voice guidance.
Front All (Default): Uses both front speakers
for voice guidance.
NAV Voice Volume
Adjusts the volume for voice guidance of the
navigation system. Default is "24".