Navigation Setup; Camera Setup - Kenwood DNX571TR Instruction Manual

Return to the Top page
Setting Up

Navigation Setup

You can set navigation parameters.
1
Touch [Menu] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Navigation].
Navigation SETUP screen appears.
4
Set each item as follows.
NAV Interrupt Speaker
Selects speakers used for voice guidance of the
navigation system.
Front L: Uses the front left side speaker for
voice guidance.
Front R: Uses the front right side speaker for
voice guidance.
Front All (Default): Uses both front speakers
for voice guidance.
NAV Voice Volume
Adjusts the volume for voice guidance of the
navigation system. Default is "20".
NAV Mute
Mutes the volume of rear speakers during
voice guidance of the navigation system.
Default is "ON".
100 100

Camera Setup

You can set camera parameters.
1
Touch [Menu] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Camera].
Camera SETUP screen appears.
4
Set each item as follows.
R-CAM Interruption
Sets a method for switching the display.
Setting values are ON and OFF.
ON: Switches to the rear view camera video
display when shifting to reverse or
pressing the <TEL>*
OFF (Default): Switches to the rear view
camera video display when
pressing the <TEL>*
1 second.
*1 [TEL Key Longer than 1 Second] must be
set to "R-CAM". See
NOTE
• To hear the sound from the rear view camera, set
the "AV-IN Interface" to Rear camera. See
Setup (P.101).
1 button for 1 second.
button for
1
User interface (P.94).
AV Input